Open Wheel Modified Classifieds

 

 

SBC 345 ROLLER MOTOR FOR SALE

Custom built by former Joe Gibbs Racing engine tech. Great hi-rpm Dart steelhead motor. 540hp, 410fp torque (on race gas)and will turn 8,000rpm all day. Components include:

GM 010 block 4.060 bore
Bryant 3.330 crank BBC snout (former JGR crank)
Crower 6.0 rods
JE flat top pistons with napier 2nd ring
Comp Cam 262/264 .420 lobe life
Jesel Race Series 1.65 shaft rockers
Cloyes Hex-a-just timing set
Cloyes 2-piece timing cover
ATI 6.325 Balancer/CV Pullies
Dart Iron Eagle 230cc heads (ported)
PSI springs,Del West locks/retainers
Ferrea Competition SS valves 2.08/1.60
Billet Fuel Pump/Stewart Stage 3 H2O pump
HVH1000 intake ported to heads
MSD 85551 Distributor w/wires/Cap-a-dapt
Comp roller lifters and 3/8 push rods
M77 BBC oil pump/CP100KO pan
Steel braided cooling lines.

This engine has 230 documented laps since last refresh. Great modified engine or other 23 degree steel head rules. Great off the corners, quick response and smooth. Ready to drop in and run. You won't be disappointed, dyno info available. Call Ben at 601-606-2993

(added 7-15-10)

 

 

 

08 Modified roller.  12 races.  All new parts, with quick change!
Also: 24’ enclosed trailer with generator
Call 45 Race Shop for more information.

731-686-3399
1-877-493-7223

(added 7-07-10)

 

 

2003 American made modified, 3 bar, 3 speed transmission, radiator, Bilstien shocks. Complete roller all you need is motor and power steering pump. 
$3,500.00 Call Nathan at 870-613-7165

(added 6-16-10)

 

For Sale: 2008 (IMCA/SIMS) Southern sport mod
Car: Raptor chassis #66 Like new never bent badly. Completely rolling or turn key. After market upper A arms, afco low friction ball joints, steal bushings on front and new rubber on rear. US break calipers, Hawk pads, Afco dbl pass radiator, Afco 2:1 quickner, wilwood master cylinders and pedals, all gages, Kirky intermediate seat, TCI trans and torque converter, custom valved QA1 shocks, 16 gal fuel cell, almost new body, new fiber glass roof. NO JUNK.
Engine: All new bearings, Scat I beam rods, Wiesco pistons, EQ heads newly rebuilt by Brad West, Edlebrock aluminum intake, Willies Holley 4412 carb, MSD HEI distributor and wires, high volume water pump and five blade fan. This car can be bought turn key with extra parts for $ 13250.00 or less motor for $ 9750.00
call Shawn @ 870-723-3932

E-mail m1racing93@yahoo.com

 

 

 

2005 Shaw Modified - $4,500
1999 Shaw By Moyer - $3,500

Call Brian Rickman at 662-386-0464

(added 3-01-10)

 

 

FOR SALE: 
2007 Shaw by Taylor – Never Wrecked - $8,500
·         Rolling Chassis + Extras

Engine - 355 cubic inch.; 30 over; 4-Bolt, Splade with Straps - $6,500
      
Engine Includes Following:
·         Carburetor - Gaerte, Saturday Night Special 750
·         Intake – Edelbrock, Victor Super
·         Heads – Pro Topline, 220 runner, 50cc chamber
·         Cam – Huggins
·         Valves – ferrara, Stainless, 205/160
·         Lifters – Comp, Roller
·         Springs – Pacalloy
·         Piston – Ross, Flat Top
·         Rods – Comp Star, 6” Lite H-Beam
·         Rockers – Comp Gold, 1.5 Ratio
·         Crank – Callies, Compstar Comet, 40 lbs.
·         Pan – Champ, 9qt.
·         Fuel Pump – Holley, Mechanical
·         Starter – Hi Torque
·         Water Pump – Cast
·         1:1 Pulley
           

Pace 26’ Enclosed Trailer – Red w/ Checkered Flag Floor - $9,500
·         Cabinets
·         Winch
·         Generator;
·         5,300 lb Axles
·         Plumbed Air

Complete Car, Turn-Key – $16,000

Complete Car, w/ Trailer  - $24,000

Call
Aaron Keller               or           Ty Keller
(870) 926-2260                         (870) 926-2262

(added 1-10-10)

 

 

2001 Jet open wheel modified roller I would like to sell or trade for a street stock or late model stock.
Saginaw 3-speed transmission, new brake calipers, 3 new master cylinders, 9" ford full floater with 5X5 hubs.
Car is straight. Raced 2-3 years ago. Please call and we can discuss sell or trade.
 
Thanks,
 
Glen Brown 662-678-3947

(added 11-14-09)

 

2005 Shaw modified for sale, turn key or roller.

$12,000 turn key firm
$ 5,000 roller

motor has 6 races on it, 355 .030 good stock block (3970010 casting), aftermarket main caps, forged eagle rotating assy., AFR 227 ported heads, comp roller cam, etc.

roller has best of everything

Many extra parts available. We can make a deal.

moving, must sell

call or e-mail

Ron Grandel
901-834-5065 or Eetdirt36@aol.com

 

-2005 Troyer Max-Flex Chassis, Body (w/extra body panels), fuel cell, brake lines,
…….fuel lines, master cylinder, kickrails, bumpers. $1500.
-Adjustable pan hard $300
-Top wing (black) $300
-Top wing (white) $300
-Top wing (white) $250
-Smart tube rear end w/ big bert hubs, brake rotors, bird cages $1500
-Complete front axle w/big bert hubs, LH rotor $600
-Complete front axle w/ LH rotor $450
-Steering gear $450
-Bert transmission with handles $750
-Bert transmission with handles (needs tail section) $500
-Various sizes of wide-5 wheels $60-$75 each.
-2- Wilwood brake calipers $80 each
-2- 2” wide-5 wheel spacers $50 each
-4- Troyer designed adjustable shocks $300 (set of 4)
-Right side spring rod $50
-Brass radiator big core $125
-2- Power steering pumps $45 each
-2- Reverse starter mount bell housing $300 each
-2- Reverse mount starters $150 each
-NE Modified headers $125
-Vertex mag (just freshened) $350

If interested in any parts listed or car as a roller or race-ready call David.  318-470-1324

(added 10-18-09)

 

 

2007 bob pierce mod. Complete roller car number 541 quickchange rear end 10 nights quickcar gauges hypercoil springs afco shocks currently set up as spring behind but have clamp un-clamp lr birdcage and swivel bucket for rr spring on top.  Very fast car just don’t need 2 for more info call George @ 270-841-2691 days or 618-524-2508 evenings

(added 9-28-09)

 

 

2008 VICTORY CHASSIS MODIFIED BY JR MOTORSPORTS

34 nights,straight,candy blue aftermarket chevelle frame,genesis shocks,afco springs,new aero blue wheels,32 tear drop cell,3 guage panel,tach,brake bias guages,kirkey seat,shifter,msd coil,box,motor plate with solenoid, radiator with chrome shroud,new chrome bumpers,lines ran,all wired,spare blue aero wheels, 17 spare front and rear afco springs,spare a-frames and ball joints,proven winner,very consistent top 5 car.Car was driven by Buzz Wilson  1 402 601-0965  dschaaf1@neb.rr.com

(added 9-18-09)

 

 

2005 PRO OPEN WHEEL MOD. COMPLETE ROLLER MSD, ROLLER BEARING GAS PEDAL, PWR STEERING PUMP, COIL, RECALL TACH,KIRKEY SEAT 4 BAR BOTH SIDES,32 FUEL CELL, HEADERS AND GEAR. ALL YOU WILL NEED IS MOTOR AND TRANS. COMPLETE 4,000 JERRY 256-591-7290 STRAIGHT CLEAN LOOKING CAR E-MAIL punklindsey@yahoo.com FOR PICS

(added 7-22-09)