Garnertown Speedway 2007 Rules for: Mini Stocks

 

BODY AND FRAME
The body to be steel or aluminum, stock or semi-stock after market bodies allowed.

(No 2 seat sports cars allowed). Minimum cutting for tire clearance. Unibodies may be tied, and bracing may be done on frame only for rigidity, with frames being stock. The stock steel unaltered floor pab, firewall, trunk floor must be retained, unless allowing room for fuel cell installation. All doors must be welded, chained, or bolted shut. All glass and chrome trim must be removed. All cars must have stock steel or aluminum bumpers. Hood and trunk must be pinned. Wheelbase of 90 and not more than 101.

SUSPENSION
Suspension may be modified, after-market springs and shocks are permitted.

Spacers are permitted. No tubular A-arms, air shocks, or weight jackers are allowed.

No coil overs.

ROLL CAGE
Minimum 4-point roll cage with minimum three driver sidebars. 1 3/4" tubing with .095 or 1 1/2" tubing with .125 wall. Front and rear loops permitted. Track officials will inspect all roll cage installation for safety.

ENGINE
Engine to be four cylinder only and must be in stock location. Engine must match body. (Ford to Ford, Chevy to Chevy, etc.) Flat tappets or hydraulic cam only. No after-market aluminum heads, .060 oversized pistons maximum, and no dome pistons. Headers are permitted.

CARBURETOR
One carburetor to be one or two barrel, naturally aspired, gasoline, down draft only.

No type injection, be it air, water, fuel, or nitrous oxide. Carburetor must be stock or RT Holley unmodified, adapter allowed.

DISTRIBUTORS
After market ignitions and distributors allowed. No magnetos.

FUEL CELL AND FUEL PUMP
Fuel cell is mandatory, and must be retained by two metal straps. Fuel pump to be manual only if possible.

TIRES
Recaps will be allowed. Wheels to be steel only with a 8" wide limit. We recommend that the right front wheel be reinforced or use oversized lugs. No beadlocks. Tires no wider than 8".

TRANSMISSION
Must have a single disc clutch or a working torque converter. Car must be able to start and back up under its own power without stopping engine.

DRIVESHAFT
Driveshaft must be painted white. Driveshaft loop mandatory. 2" minimum.

REAREND
Stock O.E.M. Type rearends only. Must match body and frame (Ford to Ford, Chevy to Chevy, etc.). Lock rearend permitted.

Batteries may be relocated, but must be securely strapped and anchored steel enclosed box.

No traction control device allowed.

CAM PROTEST
$75.00 - This consists of removing valve cover and check for roller cam.