Garnertown Speedway 2007 Rules for: Pure Street Cars

MINIMUM WEIGHT 3400 LBS AFTER RACE

CAR
1. Any American made sedan with a stock firewall and floor pan and frame with 107 inch minimum wheelbase.
2. Sub frame cars may tie frames together under the car. Mount in stock location, any mount.
3. All cars must have a minimum 6 point roll cage. 3 bars in driver side door and 2 in passenger side.
4. Stock front and rear bumper. Must have a tow hook on the front and rear. Mounting is optional.
5. If the car claimed originally came with a spoiler, a stock spoiler will be allowed.
6. Crossbars are allowed under the floorpan. All other bars are optional.
7. Stock steel factory assembly line production body for the make of car in stock location.
8. Plastic nose is permitted. No wedge nose.
9. Fuel cell as required. Must be secured by 1 inch by 3/16 inch steel straps with 3/8 inch bolts or larger.
10. Battery may be relocated but not in the driver compartment.
11. 8" steel wheels max. 275 - 60 - 15 tires max (no racing tires permitted).
12. Minimal cutting for tire clearance, roll cage and fuel cell, no other cutting allowed.

SUSPENSION
1. All suspension must remain in stock location.
2. Racing springs and shocks allowed.
3. Spring buckets and lowering blocks allowed. No weight jacks.
4. Stock rear end for make of car GM to GM, FORD to FORD, and CHRYSLER to CHRYSLER, may be locked.
5. Stock 4 wheel working brakes, no shut off valves, no disc on rear and no after market components.
6. Brake pedal must remain stock and in stock location.
7. No quick steers allowed.

TRANSMISSION
1. Manual or automatic with working torque converter.
2. Minimum 10 1/2 clutch.
3. Flywheel must be steel and weigh minimum 20 lbs.

ENGINE
1. 360 cubic in. max (may have max .060 overbore). Must pull 19 inches vacuum at 900 RPM.
2. Engine must have factory assembly line production components throughout engine. Mounts in stock position, any mount.
3. Maximum valve size allowed .194 intake, .150 exhaust. No vortec heads.
4. Stock production 2 barrel carb. and stock 2 barrel cast iron intake manifold only.
5. Stock exhaust manifold or headers allowed.
6. Stock ignition.
7. Aluminum radiator okay.
8. Head must have 55 cc minimum volume.

ANYTHING NOT SPECIFIED MUST BE STOCK.

.